-
Expert Support -
Premium Protection -
Fast Shipping
Kit spécialisé d’appareil respiratoire à épuration d’air FM54™
Le respirateur à épuration d’air FM54 d’Avon Protection offre une protection maximale et une flexibilité totale. Le FM54 offre une résistance améliorée au feu ainsi qu’une protection du visage, des yeux et des voies respiratoires contre les menaces chimiques, biologiques, radiologiques et nucléaires (CBRN), les agents antiémeutes, les produits chimiques industriels toxiques (TIC) et les matériaux industriels toxiques (TIM), tout en conservant une flexibilité extrême pour l’utilisateur lorsque les profils de mission évoluent.
Ce kit de masque à gaz comprend :
- Respirateur à épuration d’air FM54™
- Filtre CBRNCF50
- Filtre antiémeutes CTCF50
- Écran amovible transparent
- Écran amovible pare-soleil
- Un étui universel pour masque (idéal pour constituer un kit d’urgence avec masque à gaz)
Le produit expédié dans le cadre de commandes en ligne peut avoir plus d’un an.
VEUILLEZ NOTER QUE TOUTES LES VENTES SONT DÉFINITIVES. LES RETOURS D’ARTICLES DONT L’EMBALLAGE A ÉTÉ OUVERT NE SERONT PAS ACCEPTÉS.
Dans le cas rare d’un produit défectueux, veuillez consulter notre politique de retour et contacter le service client pour obtenir des instructions supplémentaires.
Performance
Technical Data
| CBRN Agent Resistance | Requirement | FM54 Performance |
|---|---|---|
| Mustard Vapor (HD) | 36 hours | > 36 hours |
| Mustard Liquid (HD) | 36 hours | > 36 hours |
| Sarin (GB) | 36 hours | > 36 hours |
| Laboratory protection factor performance (sodium chloride) | 2,000 | > 10,000 |
| Breathing Performance | ||
| Re-breathed CO2 | < 1% | |
| Inhalation Resistance | 30 L/Min | < 5 mm WG |
| 95 L/Min | < 12 mm WG | |
| 160 L/Min | < 23 mm WG | |
| Exhalation Resistance negative pressure mode | 85 L/Min | < 8 mm WG |
| 160 L/Min | < 12 mm WG | |
| Weight | ||
| FM54 mask (excluding filter | < 0.65 kg (1.43 lbs) | |
| Field of View | ||
| Visual Field Score (NIOSH CBRN Standard) | 96 | |
| Materials Used | ||
| FM54 Mask | Chlotobutyl / Silicone rubber & Polyurethane | |
| Hydration | ||
| Drinking flow rate | 230 mL/min | |
Sizes & Fit
*ALL SALES ARE FINAL. OPEN BOX RETURNS WILL NOT BE ACCEPTED.
Please select the correct size according to the sizing chart guide.
NOTE: For proper mask fit, faces must be clean shaven. Facial hair, sideburns, bangs and headwear may prevent a protective facepiece from forming and/or maintaining a tight-fitting seal on someone’s face. It is recommended the user be clean shaven and/or hair pulled back for sizing and using the respirator to ensure an appropriate seal.
To ensure you have selected the correct size you should perform a negative pressure test. The negative pressure test can be performed by putting the mask on your face, breathe out, then block the inhalation valve and take a deep breath. For the FM50 you will need to block both inhalation valves before taking a breath. The mask should collapse to the face. If you experience a tight seal to your face then the mask has the right fit.
If you are still unsure of your size or are certain you are going to be in a hazardous environment and need to ensure the most accurate sizing you may purchase a Sizing Tool.
*Except in the rare case of defective product. Please contact customer service for further instruction in this instance.
Warnings and Limitations of Use
- Always perform a negative pressure leak test before using this respirator mask with filters.
- This gas mask with filters is not suitable for use in confined spaces such as stills, tanks or sewers. This device does not provide supplied breathable air.
- If you have facial hair or wear glasses, the mask may not seal properly, reducing its protection.
- Do not use this respirator mask in environments with low oxygen (less than 19.5%) or in areas with airborne contaminants/pollutants the filter can't protect against.
- Do not use this gas mask and filter in oxygen-enriched atmospheres (> 22.5% Oxygen).
- Set up, check, donning, doffing, clean, and maintain the gas mask kit in a clean area free of contaminants.
- Do not use if any system component demonstrates signs of wear or damage.
- Do not use in areas where the head harness may be exposed directly to flame.
- The Avon FM50™ filter canisters provided with this equipment do not offer protection from smoke or carbon monoxide.
Misusing the gas mask emergency kit can cause serious harm or death. Avoid these actions:
- Using the gas mask with filters for firefighting.
- Modifying, removing or re-configuring any of the system components other than as recommended by the manufacturer.
- Attaching unapproved equipment or accessories to the respirator mask with filters.
- Re-using the equipment without appropriate decontamination or following impact or tear damage without inspection and testing, even though contamination or damage may not be apparent.
- Using the gas mask and filter with non-approved filter canisters.
