-
Expert Support -
Premium Protection -
Fast Shipping
PC50™ insatskit
Avon Protection PC50™ skyddsmask bygger på de brett använda maskerna i 50-serien och är utformad för att ge skydd i farliga och förorenade miljöer som kräver en robust, fälttestad och konkurrenskraftigt prissatt produkt med militär härkomst som uppfyller deras operativa behov.
Detta kit med gasmask innehåller:
- PC50™ luftrenande andningsskydd
- Ett CTCF50-filter mot kravallbekämpningsmedel
- Ett yttre visir för solljus
- Ett genomskinligt yttre visir
PC50 finns i tre storlekar, med antingen vänster- eller högerplacerade 40 mm-filterhållare som passar traditionella eller konforma filter. Den standardiserade kommunikationsporten möjliggör integrering med befintliga radioapparater. PC50 kan utrustas med ett synkorrigeringssystem och olika yttre visir för specifika operativa situationer.
USA:s regering har vissa reglerar om PC50™ luftrenande andningsskydd och förbjuder export, försäljning, överföring, transport eller leverans av produkten utanför USA utan att först ha erhållit godkännande från USA:s regering, eller annat tillstånd enligt amerikansk lag och amerikanska bestämmelser. Denna begränsning gäller oavsett om produkten är i originalskick eller har införlivats i andra artiklar. Denna produkt omfattas av Export Administration Regulations (EAR) med klassificeringen 1A004.
Produkter som skickas för att fullgöra e-handelsbeställningar kan vara mer än ett år gamla.
OBSERVERA ATT ALLA KÖP ÄR SLUTGILTIGA. RETURER AV ÖPPNADE FÖRPACKNINGAR ACCEPTERAS INTE.
I det sällsynta fallet att en produkt är defekt, se vår returpolicy och kontakta kundtjänsten för ytterligare instruktioner.
Observera att denna vara skickas inom 10 dagar.
Performance
The PC50 is approved for use with the CTCF50 Canister providing protection against CS/CN agents in both vapor and aerosol form and particulate matter. The PC50 is also approved for use with the CFP100 Canister providing protection against particulates only. And NIOSH approved (TC-14G-0316) (TC-84A-9233).
| Breathing Performance | PC50 Performance | |
|---|---|---|
| Inhalation resistance without filter: | ||
| 30 l/min | 0.5 mbar | |
| 90 l/min | 1.5mbar | |
| 160 l/min | 3.5 mbar | |
| Exhalation resistance 85l/min (with CTCF50 filter) | 1.9 mbar | |
| Mask weight (excluding filter) | 550 grams | |
| Visual Field Score (VFS) | >90 | |
Sizing
Please select the correct size according to the sizing chart found in the photo gallery for this product.
- Clean-shaven faces are required for the Avon FM50™ to fit properly. The gas mask and filter should form a tight seal on the face to ensure protection.
- Facial hair, sideburns, bangs and headwear may prevent a protective facepiece from forming and/or maintaining a tight-fitting seal on someone’s face. It is recommended the user be clean shaven and/or hair pulled back for sizing and using the respirator to ensure an appropriate seal.
- Use the negative pressure test to confirm the right fit for your gas mask kit.
- Put the mask on your face and breathe out.
- Block the inhalation valve and take a deep breath.
- Specifically for the Avon FM50™, you will need to block both inhalation valves before taking a breath.
- The mask should then collapse to the face.
- If you experience a tight seal to your face, then the mask has the right fit.
If you are still unsure of your size and need to ensure the most accurate sizing, purchase our Sizing Tool for the perfect fit.
Warnings and Limitations of Use
- Always perform a negative pressure leak test before using this respirator mask with filters.
- This gas mask with filters is not suitable for use in confined spaces such as stills, tanks or sewers. This device does not provide supplied breathable air.
- If you have facial hair or wear glasses, the mask may not seal properly, reducing its protection.
- Do not use this respirator mask in environments with low oxygen (less than 19.5%) or in areas with airborne contaminants/pollutants the filter can't protect against.
- Do not use this gas mask and filter in oxygen-enriched atmospheres (> 22.5% Oxygen).
- Set up, check, donning, doffing, clean, and maintain the gas mask kit in a clean area free of contaminants.
- Do not use if any system component demonstrates signs of wear or damage.
- Do not use in areas where the head harness may be exposed directly to flame.
- The Avon FM50™ filter canisters provided with this equipment do not offer protection from smoke or carbon monoxide.
Misusing the gas mask emergency kit can cause serious harm or death. Avoid these actions:
- Using the gas mask with filters for firefighting.
- Modifying, removing or re-configuring any of the system components other than as recommended by the manufacturer.
- Attaching unapproved equipment or accessories to the respirator mask with filters.
- Re-using the equipment without appropriate decontamination or following impact or tear damage without inspection and testing, even though contamination or damage may not be apparent.
- Using the gas mask and filter with non-approved filter canisters.
