C50™ Air Purifying Respirator UK
The Avon Protection C50™ protective mask shares key technologies with the U.S. M50/JSGPM (Joint Services General Purpose Mask) to provide maximum operational flexibility. It is capable of countering multiple threat scenarios, including chemical, biological, nuclear and radiological (CBRN) agents, toxic industrial chemicals (TICs), and toxic industrial materials (TIMs).
Use of the product:
You will read and understand the user instructions supplied with this product.
Warning: Use of Avon Protection equipment, other than in compliance with the user instructions or use by personnel who are unqualified or untrained, is dangerous, and the user may be exposed to serious bodily injury or death.
If you have any questions concerning the safe operation of this product, please reference your user manual or reach out to customer service. There is a user instruction included in your product purchase. If the user instructions are not supplied to you, a copy can be obtained by contacting Avon Protection.
I certify that I have read and acknowledge the above and will use the product only in accordance with the user instructions
Product shipped in fulfillment of e-commerce orders may be more than one year old.
Export Control Information
Ireland: Controlled products exported to Ireland are exported under the following export licence: OGEL (Export of Dual use items to EU Member States). By placing an order, you agree to comply with the terms and conditions of the licence, a copy of which can be found here: Open General Export Licence Export of Dual-Use items to EU Member States
Australia: Controlled products exported to Australia are exported under the following export licence: GEA 001 By placing an order for delivery to Australia, you agree to comply with the terms and conditions of the licence, a copy of which can be found here: Council Regulation (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items (Recast).
| CBRN Agent Resistance | Requirement | C50 Performance |
|---|---|---|
| Mustard (H) / Sarin (GB) | 36 hours | Greater than 36 hours |
| Soman (GD) / VX | 36 hours | Greater than 36 hours |
| Laboratory protection factor performance (sodium chloride) | 2,000 | Greater than 10,000 |
| Re-breathed CO2 | Less than 1% | 0.8% |
| Inhalation resistance at: | ||
| 30 l/min | 5 mm WG | 3 mm WG |
| 95 l/min | 15 mm WG | 13 mm WG |
| 160 l/min | 25 mm WG | 23 mm WG |
| Exhalation resistance at 160 l/min | 30 mm WG | 15 mm WG |
| Mask weight | N/A | 490 grams |
| NIOSH Visual Field Score (VFS) | 90 | 96 |
Please select the correct size according to the sizing chart guide found in the photo gallery for this product.
NOTE: For proper mask fit, faces must be clean shaven.
Facial hair, sideburns, bangs and headwear may prevent a protective facepiece from forming and/or maintaining a tight-fitting seal on someone’s face. It is recommended the user be clean shaven and/or hair pulled back for sizing and using the respirator to ensure an appropriate seal.
To ensure you have selected the correct size you should perform a negative pressure test. The negative pressure test can be performed by putting the mask on your face, breathe out, then block the inhalation valve and take a deep breath. For the FM50 you will need to block both inhalation valves before taking a breath. The mask should collapse to the face. If you experience a tight seal to your face then the mask has the right fit.
If you are still unsure of your size or are certain you are going to be in a hazardous environment and need to ensure the most accurate sizing you may purchase a Sizing Tool.
*Except in the rare case of defective product. Please contact customer service for further instruction in this instance.
- Always perform a satisfactory negative pressure leak test before using this respirator.
- Do not use in confined spaces such as stills, tanks or sewers. This device does not provide supplied breathable air.
- It is unlikely that the requirements for inward leakage of the system will be met if facial hair, or spectacle side arms pass under the face seal of the full face mask.
- Do not use this equipment in Oxygen deficient atmospheres (<19.5% Oxygen) or for airborne contaminants or pollutants for which the approved filter canister(s) will not provide adequate protection.
- Do not use this equipment in Oxygen enriched atmospheres (> 22.5% Oxygen).
- System set-up, pre-check, donning, doffing, cleaning and maintenance must be performed in an area known to be free of contaminants.
- Do not use if any system component demonstrates signs of wear or damage.
- Do not use in areas where the head harness may be exposed directly to flame.
Potential misuse of the equipment may result in serious, irreversible respiratory harm or death. These actions include:
- Firefighting.
- Modifying, removing or re-configuring any of the system components other than as recommended by the manufacturer.
- Adapting the system to accommodate attachments or apparatus not approved for use by the manufacturer.
- Re-using the equipment without appropriate decontamination or following impact or tear damage without inspection and testing, even though contamination or damage may not be apparent.
- Use with unapproved filter canisters.
